About this item

• 🍁1:1 Ratio By Volume & EASY TO USE. Teexpert art epoxy resin AB adhesive kit is perfect for artwork art craft cast resin, also for coating epoxy. Very easycast resin epoxy with instructions is perfect for starter beginner and professional artist adult.
• 🍁CRYSTAL CLEAR & SELF LEVEL. The easy clear cast craft resin epoxy pour kit is crystal clear casting and coating system. To ensure better self level effect, please complete the stirring in 3-4 minutes, and pour into the molds as soon as possible.
• 🍁HARD AS A ROCK & NO BUBBLE. The leisure art craft DIY resin epoxy kit is fast curing and hard as a rock if you ensure 1:1 ratio by volume, and stir thoroughly. No bubble if stir evenly and slowly.
• 🍁WIDE USE & NON TOXIC. The art craft crystal clear epoxy resin and hardener kit is for Jewelry Wood metal steel artwork drawing canvas paintings woodworking sculpture flowers animals earrings necklace ring keychain hair sticks eggs or other creative projects. A little smell when stirring, non toxic, but suggest PPE when handling.
• 🍁100% MONEY BACK & SERVICE. For any reason you are not 100% happy with the epoxy resin, please feel free to Contact Us. We will respond to you within 24 hours and assist you with a refund at no additional cost.

  What will you get?

  • 1 X 16oz PREMIUM Epoxy Resin
  • 1 X 16oz PREMIUM Hardener
  • 4 X Mixing Sticks
  • 2 X Beak Cover
  • 2 X Measuring Cups
  • 2 X Disposable Gloves
  • 2 X Droppers
  • 1 X Detailed Instruction

    We Want to Give You Helpful Tips Before You Start Your Resin Creation:

    • Measure: Make sure to mix according to 1:1 volume ratio.
    • Fully mixed: Stir slowly and in one direction and Make sure to scrape sides and bottom of mixing container to ensure all resin and hardener are fully blended.
    • Pouring: After mixing, stand the resin for 2-4 minutes to allow the bubbles to fully dissipate before pouring.
    • Curing: Can be fully cured and demolded within 24 hours normally . However, the specific cure time of project will vary depending on the amount of resin, thickness, and temperature.
    • Use Note: Teexpert epoxy resin is not suit for tumblers craft.

      Common Problem ＆ Solution：

      • DOES NOT CURE？

      (1.)Add too much thing, like glitter, epoxy pigment or mica powder.

      (2.)The temperature is too low or the relative humidity is too high.

      (3.)Resin A and Hardener B were not mixed in a 1:1 volume ratio.

      • HOW TO AVOID BUBBLES?

      Please use it in the optimum operating temperature （77°F/25°C）.

      Please soak the resin and hardener separately into warm water before mixing them.

      Please stir slowly and in one direction, stirring too fast may cause air bubbles easily.

      Please use the heat gun to eliminate air bubbles and got the no-bubble effect.

      More Instructions about Our Epoxy Resin :

      Ideal Room Temperature	24-30ºC / 75-85ºF
      Working Time / Pot Life	30-40 minutes(70°F/100g Mass)
      Demold/Tack-Free Time	24-48 hours
      Storage	Use at room temperature or slightly warmer. Keep containers tightly sealed and away from heat and cold for long term storage.
      Shelf Life	1 year unopened / 6 months opened (approx.)