Teexpert
Teexpert Easy Coat Resin- Top Coating Epoxy Resin- 24OZ 2:1 Mix Ratio
Teexpert Easy Coat Resin- Top Coating Epoxy Resin- 24OZ 2:1 Mix Ratio
Precio habitual
$27.99 USD
Precio habitual
Precio de oferta
$27.99 USD
Precio unitario
por
Impuesto incluido.
No se pudo cargar la disponibilidad de retiro
- 194℉ SUPER HEAT RESISTANT - Our epoxy coating outperforms others in high heat resistance, enduring temperatures up to 194℉ without dents. While others falter at 140℉, ours remains resilient, even against hot coffee cups. Once fully cured, it achieves an impressive surface hardness of 85D+, surpassing alternatives at 70D+. Top pick for heat-resistant coating resins!
- PERFECT FOR VARIOUS SURFACES - Teexpert tabletop epoxy resin is designed for coating a variety of surfaces including table tops, bathroom countertops, bar tops, wood tables, surfboards, canvas, coasters, and DIY art crafts. This resin kit offers a protection coat against high temperatures and also acts as a protective layer for artwork, shielding it from moisture, scratches, and stains.
- HIGH GLOSSY COAT FOR A FRESH LOOK - Say goodbye to dull surfaces! Teexpert tabletop epoxy resin delivers a high-gloss and crystal clear finish, shielding your countertop and art pieces from wear and impact, and rejuvenating your countertop with a fresh look. Safe and elegant as a coating solution. It's not for casting.
- SELF-LEVELING & SELF-DEFOAMING - Teexpert countertop coating epoxy is self-leveling and self-defoaming, ensuring easy and efficient application, and avoiding uneven or sloping surfaces. It's stain-resistant, moisture-resistant, low odor, and yellow-resistant, perfect for coating surfaces in contact with food, like kitchen countertops and trays.
- EASY TO USE - 2:1 MIX RATIO - This 2-part epoxy resin is beginner-friendly, with a 2:1 mixing ratio by volume, stirring the mixture slowly and thoroughly in one direction for 3-5 minutes until no swirls are visible. At room temperature of 70-80°F, initial curing takes 8-10 hours and full curing within 24 hours.
- STEPS FOR SUCCESS - ①Please be sure to wear gloves and keep the room ventilated when using. ②For optimal defoaming, apply each coat no thicker than 1/8" to 1/5" maximum thickness. ③It is recommended that you practice with a test piece before working on large objects and surfaces.
